-Induction hobs are made from smooth, ceramic glass, the heat comes from a magnetic induction coil which heats the cookware but not the cooking surface.
-Pans suitable for induction hob use must be made from magnetisable metal such as cast iron or steel.
-Pure aluminium, copper or glass pans will not work with this type of hob unless the base is bonded with a magnetic metal.
-Check that pans are attracted to a magnet - this ensures that they are suitable for use with an induction hob.
-It is important that you use only metal pans specifically designed and/or approved for use on Induction Hobs.
-Never allow melamine or plastic containers to come in contact with the heat zones.
-This quality appliance has been tested and certified to meet all applicable electrical and safety standards.
-This appliance must be installed and connected in accordance with current regulations.
-After unpacking the appliance ensure that there is no visible damage.
-If the appliance has been damaged during transit, do not use it, contact your retailer immediately.
No. of Burner: 4.
Hob Panel: Black Crystal Glass Plate.
Bottom case: Metal.
Voltage: 220-240 AC, 60HZ. (Not 110V)
Burner Power: 2.0+1.3+2.0+1.3 KW/HR (6823+4435+6823+4435 BTU/HR)
Diameter of the burner:180mm+150mm+180mm+150mm (Left to Right)
Buttom Size: 750*460mm(29.5*18.11 inch)
Glass Panel Dimention: 800*500mm (31.5*19.7 inch)
Fit in size: 750*460mm (29.53*18.11 inch)
1 * 4 Burner Induction Cooker (As The Picture Shown)
1 * Operation Instruction